| |
|
|
| |
Product |
Product > top install mixer > moderate/low speed mixers |
 |
|
| Moderate, Low speed Mixers |
| |
LSC series mixers collocated with hard-tooth inlined gear reducer, its features of stable drive, low noise, high efficiency, compact structure, strong load capacity, vibration absorption, good composite performance, etc, fit for low or moderate viscosity operation of blend, solution, solid suspension, heat transfer, reaction, extraction, and crystallization, etc.
LSZ series mixers adopt the hard-tooth column gear and helix cline gear for driving, horizontal motor and module composite design, its features of the low whole height, compact structure, drive precision, strong load capacity, convenient mounting, etc. Output shaft of reducer designed by oil-separation cover structure, ensure no oil leakage at any time, used for the mixing occasion such as for limitation of food, sanitation, or mounting space.
LSP series mixers collocated with hard-tooth bevel-helical gear reducer, be fit for the midding or high load mixing work of every industry, its high speed ratio, strong load capacity, stable drive, low noise, and high efficiency. Output shaft of reducer designed by oil-separation cover structure, ensure no oil leakage at any time. |
|
|
Product Parameter
| Model |
Drive mode |
Power |
Mixing speed(r/min) |
Seal mode |
| LSC series |
Gear reduction |
0.12～300 |
45～400 |
Rubber lip seal /Packing box /Mechanical seal |
| LSZ series |
Gear reduction |
0.55～110 |
16～300 |
Rubber lip seal /Packing box /Mechanical seal |
| LSP series |
Gear reduction |
0.55～300 |
12～300 |
Rubber lip seal /Packing box /Mechanical seal |
|
| Familiar type of collocated agitator |
LSC, LSZ, LSP series mixers collocated with the agitator type for very extensive, based on its different techniics requirements and site condition, can collocate A100 series helical mode, A200 series two blades paddle mode, A300 series three blades mode, A400 series frame mode, A500 & A600 turbine series agitators, the actual collocation refer to the agitator part of the “Mixers Selection Book” edited 2.0.
|
| A650 six arrow-blades disk turbine |
|
A650 six arrow-blades disk turbine mode
A650 mode agitator can produce two different orientation circulation flow on the axis direction, its impellers make ㄑparaboloid. Its large axis ejection, low power consumption, specially applied to the solid suspension, or used for the operation of blend, air absorption, fluid transfer |
| A610 Six blades disk turbine |
|
A610 Six blades disk turbine agitator
Radial flow mode, its impeller type is of the strongest mixing intensity and the highest power consumption in the moderate or high speed agitators, its large shear, strong dispersion capacity. The upper and down of agitator disk form two circulation flows, air dispersion will be much stable and uniform under the effect of this disk domino offect, especially fit for air dispersion and absorption of high strength request. |
| A520 Four inclined-blades split turbine |
|
A520 Four inclined-blades split turbine
Axis flow mode, its better convection circulation and onflow pervasion, especially fit for operation of blend,, crystallization of little viscosity, dispersion, reaction, solution, solid suspension, heat transfer, etc. |
| A135 Three ringed-blades propeller |
|
A135 Three ringed-blades propeller
A135 agitator with stabilization ring, under the high speed circs plays adjustion system action by liquid damp. In general circs can improved by critical speed of 0.1 to 0.2, be applied to the low viscosity operation of blend, solution, solid suspension, heat transfer, etc. |
| A270 Two coned-blades paddle |
|
A270 Two coned-blades paddle
A270 agitator take mainly flow of level-circled flow, produce different speed ratio with up and down of radial flow, be applied to mixing work of various subuliform angle vessel. |
|
|
|
